Please fill in the required fields to download!


    captcha

    Thank you! Your information has been submitted.

    Control cabinet Full App

    Full App

    The Full App is an affordable and convenient way to monitor and control the operation of the pumps. The button-controlled display shows information about what’s going on in the pumping station. In addition, automation also sends alarms via SMS – the easiest way to send alarms to service personnel or to the owner of pumping station. This is done by adding a modem to the control cabinet, setting alarms and entering the mobile phone numbers of the recipients of the alarms.

    The Full App is also available without the ability to send SMS alerts. Such non-transmitting control cabinet is selected for locations where the operation of the pumping station is easy to control on an ongoing basis and possible failure of the pumps will not cause damage. Such control cabinets are generally located inside the building and equipped with a flasher or acoustic alarm.


    Control cabinet Full App standard solution:

    • For one or two pumps
    • Pumps control with float switches
    • Button controlled text display
    • Automatic and manual control
    • Main switch
    • Phase control
    • Work hours counter of pumps
    • Start and stop counter of pumps
    • Current and voltage measurement
    • Alarm device with flasher or  acoustic alarm

    Extras for Full App control cabinet:

    • Pump control with a hydrostatic level sensor
    • Emergency control with two float switches
    • SMS-alerts

    Alarm messages:

    • Pump 1 failure (temperature, overload, humidity)
    • Pump 2 failure (temperature, overload, humidity)
    • Water level high (drowns)
    • Water level low (empty)
    • Opening the control cabinet door
    • Power supply failure / recovery

    In general the control cabinet is located outdoors. To protect from weather conditions, the control cabinet is mounted in a steel box (IP55), which is equipped with a thermostat and a heater. The body of the control box is made of hot galvanized steel sheet with a weatherproof powder coating (color RAL7032). Control box is equipped with following accessories: plinth, foundation, keys, etc.

    In indoor conditions, Full App control cabinet can be installed without a steel box.