Please fill in the required fields to download!


    captcha

    Thank you! Your information has been submitted.

    Control cabinet V-700

    V-700

    The V-700’s control cabinet is with maximum capabilities, allowing everything from connecting the generator up to remote control. Information on what is happening at the pumping station is available on the 7-inch color touch screen inside of control cabinet door. The control panel screen image also opens on the remote user’s computer or smart phone screen. Remote management allows you to fully monitor and control the operation of the pumps and to change the set parameters (eg water levels). Recorded data and graphs can be used to analyze the performance of pumps and what is happening at the pumping station. All alarms can be transmitted via SMS and e-mail. This kind of control cabinet is intended for an informed customer, such as a waterworks and municipal company, who wants a remote control automation solution with maximum capabilities. This is a good alternative to SCADA remote management system. The great advantage is that the user does not need to invest to build up the SCADA system.


    Control cabinet V-700 standard solution:

    • For one or two pumps
    • Pumps control with a hydrostatic level sensor
    • Emergency control with two float switches
    • Automatic and manual control
    • Color 7” touch screen
    • Main switch / Re-switch
    • Sockets 400 and 230 V
    • Plug for generator
    • RCD protection
    • Phase control
    • Surge arrester
    • Work hours counter of pumps
    • Start and stop counter of pumps
    • Measurement of pressure from pumping station outlet
    • Operating schedules of pumps (water levels, water pressure, currents, etc.)
    • Remote management
    • SMS alerts

    Extras for V-700 control cabinet:

    • Measurement of the flow from the outlet
    • Double power supply (RLA)


    Alarm messages:

    • Pump 1 failure (temperature, motor protection)
    • Pump 2 failure (temperature, motor protection)
    • Pump 1 overload
    • Pump 2 overload
    • Pump 1 underload
    • Pump 2 underload
    • Pump 1 moisture
    • Pump 2 moisture
    • Water level high (drowns)
    • Water level low (empty)
    • Opening the control cabinet door or pumping station cover
    • Power supply failure
    • Power supply recovery
    • Overvoltage limiter activated
    • High pressure in outlet pipe
    • Low pressure in outlet pipe
    • Battery low
    • Pump 1 in manual mode
    • Pump 2 in manual mode
    • Communication control
    • Dual power position (optional)
    • Low water flow (optional)

    In general the control cabinet is located outdoors. To protect from weather conditions, the control cabinet is mounted in a steel box (IP55), which is equipped with a thermostat and a heater. The body of the control box is made of hot galvanized steel sheet with a weatherproof powder coating (color RAL7032). Control box is equipped with following accessories: plinth, foundation, keys, etc.